Whitelisting only theme-adjacent configs

btop/btop.conf

@@ -0,0 +1,272 @@
+#? Config file for btop v.1.4.6
+
+#* Name of a btop++/bpytop/bashtop formatted ".theme" file, "Default" and "TTY" for builtin themes.
+#* Themes should be placed in "../share/btop/themes" relative to binary or "$HOME/.config/btop/themes"
+color_theme = "Default"
+
+#* If the theme set background should be shown, set to False if you want terminal background transparency.
+theme_background = true
+
+#* Sets if 24-bit truecolor should be used, will convert 24-bit colors to 256 color (6x6x6 color cube) if false.
+truecolor = true
+
+#* Set to true to force tty mode regardless if a real tty has been detected or not.
+#* Will force 16-color mode and TTY theme, set all graph symbols to "tty" and swap out other non tty friendly symbols.
+force_tty = false
+
+#* Define presets for the layout of the boxes. Preset 0 is always all boxes shown with default settings. Max 9 presets.
+#* Format: "box_name:P:G,box_name:P:G" P=(0 or 1) for alternate positions, G=graph symbol to use for box.
+#* Use whitespace " " as separator between different presets.
+#* Example: "cpu:0:default,mem:0:tty,proc:1:default cpu:0:braille,proc:0:tty"
+presets = "cpu:1:default,proc:0:default cpu:0:default,mem:0:default,net:0:default cpu:0:block,net:0:tty"
+
+#* Set to True to enable "h,j,k,l,g,G" keys for directional control in lists.
+#* Conflicting keys for h:"help" and k:"kill" is accessible while holding shift.
+vim_keys = false
+
+#* Rounded corners on boxes, is ignored if TTY mode is ON.
+rounded_corners = true
+
+#* Use terminal synchronized output sequences to reduce flickering on supported terminals.
+terminal_sync = true
+
+#* Default symbols to use for graph creation, "braille", "block" or "tty".
+#* "braille" offers the highest resolution but might not be included in all fonts.
+#* "block" has half the resolution of braille but uses more common characters.
+#* "tty" uses only 3 different symbols but will work with most fonts and should work in a real TTY.
+#* Note that "tty" only has half the horizontal resolution of the other two, so will show a shorter historical view.
+graph_symbol = "braille"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_cpu = "default"
+
+# Graph symbol to use for graphs in gpu box, "default", "braille", "block" or "tty".
+graph_symbol_gpu = "default"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_mem = "default"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_net = "default"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_proc = "default"
+
+#* Manually set which boxes to show. Available values are "cpu mem net proc" and "gpu0" through "gpu5", separate values with whitespace.
+shown_boxes = "cpu mem net proc"
+
+#* Update time in milliseconds, recommended 2000 ms or above for better sample times for graphs.
+update_ms = 2000
+
+#* Processes sorting, "pid" "program" "arguments" "threads" "user" "memory" "cpu lazy" "cpu direct",
+#* "cpu lazy" sorts top process over time (easier to follow), "cpu direct" updates top process directly.
+proc_sorting = "cpu lazy"
+
+#* Reverse sorting order, True or False.
+proc_reversed = false
+
+#* Show processes as a tree.
+proc_tree = false
+
+#* Use the cpu graph colors in the process list.
+proc_colors = true
+
+#* Use a darkening gradient in the process list.
+proc_gradient = true
+
+#* If process cpu usage should be of the core it's running on or usage of the total available cpu power.
+proc_per_core = false
+
+#* Show process memory as bytes instead of percent.
+proc_mem_bytes = true
+
+#* Show cpu graph for each process.
+proc_cpu_graphs = true
+
+#* Use /proc/[pid]/smaps for memory information in the process info box (very slow but more accurate)
+proc_info_smaps = false
+
+#* Show proc box on left side of screen instead of right.
+proc_left = false
+
+#* (Linux) Filter processes tied to the Linux kernel(similar behavior to htop).
+proc_filter_kernel = false
+
+#* In tree-view, always accumulate child process resources in the parent process.
+proc_aggregate = false
+
+#* Should cpu and memory usage display be preserved for dead processes when paused.
+keep_dead_proc_usage = false
+
+#* Sets the CPU stat shown in upper half of the CPU graph, "total" is always available.
+#* Select from a list of detected attributes from the options menu.
+cpu_graph_upper = "Auto"
+
+#* Sets the CPU stat shown in lower half of the CPU graph, "total" is always available.
+#* Select from a list of detected attributes from the options menu.
+cpu_graph_lower = "Auto"
+
+#* If gpu info should be shown in the cpu box. Available values = "Auto", "On" and "Off".
+show_gpu_info = "Auto"
+
+#* Toggles if the lower CPU graph should be inverted.
+cpu_invert_lower = true
+
+#* Set to True to completely disable the lower CPU graph.
+cpu_single_graph = false
+
+#* Show cpu box at bottom of screen instead of top.
+cpu_bottom = false
+
+#* Shows the system uptime in the CPU box.
+show_uptime = true
+
+#* Shows the CPU package current power consumption in watts. Requires running `make setcap` or `make setuid` or running with sudo.
+show_cpu_watts = true
+
+#* Show cpu temperature.
+check_temp = true
+
+#* Which sensor to use for cpu temperature, use options menu to select from list of available sensors.
+cpu_sensor = "Auto"
+
+#* Show temperatures for cpu cores also if check_temp is True and sensors has been found.
+show_coretemp = true
+
+#* Set a custom mapping between core and coretemp, can be needed on certain cpus to get correct temperature for correct core.
+#* Use lm-sensors or similar to see which cores are reporting temperatures on your machine.
+#* Format "x:y" x=core with wrong temp, y=core with correct temp, use space as separator between multiple entries.
+#* Example: "4:0 5:1 6:3"
+cpu_core_map = ""
+
+#* Which temperature scale to use, available values: "celsius", "fahrenheit", "kelvin" and "rankine".
+temp_scale = "celsius"
+
+#* Use base 10 for bits/bytes sizes, KB = 1000 instead of KiB = 1024.
+base_10_sizes = false
+
+#* Show CPU frequency.
+show_cpu_freq = true
+
+#* How to calculate CPU frequency, available values: "first", "range", "lowest", "highest" and "average".
+freq_mode = "first"
+
+#* Draw a clock at top of screen, formatting according to strftime, empty string to disable.
+#* Special formatting: /host = hostname | /user = username | /uptime = system uptime
+clock_format = "%X"
+
+#* Update main ui in background when menus are showing, set this to false if the menus is flickering too much for comfort.
+background_update = true
+
+#* Custom cpu model name, empty string to disable.
+custom_cpu_name = ""
+
+#* Optional filter for shown disks, should be full path of a mountpoint, separate multiple values with whitespace " ".
+#* Only disks matching the filter will be shown. Prepend exclude= to only show disks not matching the filter. Examples: disk_filter="/boot /home/user", disks_filter="exclude=/boot /home/user"
+disks_filter = ""
+
+#* Show graphs instead of meters for memory values.
+mem_graphs = true
+
+#* Show mem box below net box instead of above.
+mem_below_net = false
+
+#* Count ZFS ARC in cached and available memory.
+zfs_arc_cached = true
+
+#* If swap memory should be shown in memory box.
+show_swap = true
+
+#* Show swap as a disk, ignores show_swap value above, inserts itself after first disk.
+swap_disk = true
+
+#* If mem box should be split to also show disks info.
+show_disks = true
+
+#* Filter out non physical disks. Set this to False to include network disks, RAM disks and similar.
+only_physical = true
+
+#* Read disks list from /etc/fstab. This also disables only_physical.
+use_fstab = true
+
+#* Setting this to True will hide all datasets, and only show ZFS pools. (IO stats will be calculated per-pool)
+zfs_hide_datasets = false
+
+#* Set to true to show available disk space for privileged users.
+disk_free_priv = false
+
+#* Toggles if io activity % (disk busy time) should be shown in regular disk usage view.
+show_io_stat = true
+
+#* Toggles io mode for disks, showing big graphs for disk read/write speeds.
+io_mode = false
+
+#* Set to True to show combined read/write io graphs in io mode.
+io_graph_combined = false
+
+#* Set the top speed for the io graphs in MiB/s (100 by default), use format "mountpoint:speed" separate disks with whitespace " ".
+#* Example: "/mnt/media:100 /:20 /boot:1".
+io_graph_speeds = ""
+
+#* Set fixed values for network graphs in Mebibits. Is only used if net_auto is also set to False.
+net_download = 100
+
+net_upload = 100
+
+#* Use network graphs auto rescaling mode, ignores any values set above and rescales down to 10 Kibibytes at the lowest.
+net_auto = true
+
+#* Sync the auto scaling for download and upload to whichever currently has the highest scale.
+net_sync = true
+
+#* Starts with the Network Interface specified here.
+net_iface = ""
+
+#* "True" shows bitrates in base 10 (Kbps, Mbps). "False" shows bitrates in binary sizes (Kibps, Mibps, etc.). "Auto" uses base_10_sizes.
+base_10_bitrate = "Auto"
+
+#* Show battery stats in top right if battery is present.
+show_battery = true
+
+#* Which battery to use if multiple are present. "Auto" for auto detection.
+selected_battery = "Auto"
+
+#* Show power stats of battery next to charge indicator.
+show_battery_watts = true
+
+#* Set loglevel for "~/.local/state/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
+#* The level set includes all lower levels, i.e. "DEBUG" will show all logging info.
+log_level = "WARNING"
+
+#* Automatically save current settings to config file on exit.
+save_config_on_exit = true
+
+#* Measure PCIe throughput on NVIDIA cards, may impact performance on certain cards.
+nvml_measure_pcie_speeds = true
+
+#* Measure PCIe throughput on AMD cards, may impact performance on certain cards.
+rsmi_measure_pcie_speeds = true
+
+#* Horizontally mirror the GPU graph.
+gpu_mirror_graph = true
+
+#* Set which GPU vendors to show. Available values are "nvidia amd intel"
+shown_gpus = "nvidia amd intel"
+
+#* Custom gpu0 model name, empty string to disable.
+custom_gpu_name0 = ""
+
+#* Custom gpu1 model name, empty string to disable.
+custom_gpu_name1 = ""
+
+#* Custom gpu2 model name, empty string to disable.
+custom_gpu_name2 = ""
+
+#* Custom gpu3 model name, empty string to disable.
+custom_gpu_name3 = ""
+
+#* Custom gpu4 model name, empty string to disable.
+custom_gpu_name4 = ""
+
+#* Custom gpu5 model name, empty string to disable.
+custom_gpu_name5 = ""

cava/config

@@ -0,0 +1,279 @@
+## Configuration file for CAVA.
+# Remove the ; to change parameters.
+
+
+[general]
+
+# Smoothing mode. Can be 'normal', 'scientific' or 'waves'. DEPRECATED as of 0.6.0
+; mode = normal
+
+# Accepts only non-negative values.
+; framerate = 60
+
+# 'autosens' will attempt to decrease sensitivity if the bars peak. 1 = on, 0 = off
+# new as of 0.6.0 autosens of low values (dynamic range)
+# 'overshoot' allows bars to overshoot (in % of terminal height) without initiating autosens. DEPRECATED as of 0.6.0
+; autosens = 1
+; overshoot = 20
+
+# Manual sensitivity in %. If autosens is enabled, this will only be the initial value.
+# 200 means double height. Accepts only non-negative values.
+; sensitivity = 100
+
+# The number of bars (0-512). 0 sets it to auto (fill up console).
+# Bars' width and space between bars in number of characters.
+; bars = 0
+; bar_width = 2
+; bar_spacing = 1
+# bar_height is only used for output in "noritake" format
+; bar_height = 32
+
+# For SDL width and space between bars is in pixels, defaults are:
+; bar_width = 20
+; bar_spacing = 5
+
+# sdl_glsl have these default values, they are only used to calulate max number of bars.
+; bar_width = 1
+; bar_spacing = 0
+
+
+# Lower and higher cutoff frequencies for lowest and highest bars
+# the bandwidth of the visualizer.
+# Note: there is a minimum total bandwidth of 43Mhz x number of bars.
+# Cava will automatically increase the higher cutoff if a too low band is specified.
+; lower_cutoff_freq = 50
+; higher_cutoff_freq = 10000
+
+
+# Seconds with no input before cava goes to sleep mode. Cava will not perform FFT or drawing and
+# only check for input once per second. Cava will wake up once input is detected. 0 = disable.
+; sleep_timer = 0
+
+
+[input]
+
+# Audio capturing method. Possible methods are: 'fifo', 'portaudio', 'pipewire', 'alsa', 'pulse', 'sndio', 'oss', 'jack' or 'shmem'
+# Defaults to 'oss', 'pipewire', 'sndio', 'jack', 'pulse', 'alsa', 'portaudio' or 'fifo', in that order, dependent on what support cava was built with.
+# On Mac it defaults to 'portaudio' or 'fifo'
+# On windows this is automatic and no input settings are needed.
+#
+# All input methods uses the same config variable 'source'
+# to define where it should get the audio.
+#
+# For pulseaudio and pipewire 'source' will be the source. Default: 'auto', which uses the monitor source of the default sink
+# (all pulseaudio sinks(outputs) have 'monitor' sources(inputs) associated with them).
+#
+# For pipewire 'source' will be the object name or object.serial of the device to capture from.
+# Both input and output devices are supported.
+#
+# For alsa 'source' will be the capture device.
+# For fifo 'source' will be the path to fifo-file.
+# For shmem 'source' will be /squeezelite-AA:BB:CC:DD:EE:FF where 'AA:BB:CC:DD:EE:FF' will be squeezelite's MAC address
+#
+# For sndio 'source' will be a raw recording audio descriptor or a monitoring sub-device, e.g. 'rsnd/2' or 'snd/1'. Default: 'default'.
+# README.md contains further information on how to setup CAVA for sndio.
+#
+# For oss 'source' will be the path to a audio device, e.g. '/dev/dsp2'. Default: '/dev/dsp', i.e. the default audio device.
+# README.md contains further information on how to setup CAVA for OSS on FreeBSD.
+#
+# For jack 'source' will be the name of the JACK server to connect to, e.g. 'foobar'. Default: 'default'.
+# README.md contains further information on how to setup CAVA for JACK.
+#
+; method = pulse
+; source = auto
+
+; method = pipewire
+; source = auto
+
+; method = alsa
+; source = hw:Loopback,1
+
+; method = fifo
+; source = /tmp/mpd.fifo
+
+; method = shmem
+; source = /squeezelite-AA:BB:CC:DD:EE:FF
+
+; method = portaudio
+; source = auto
+
+; method = sndio
+; source = default
+
+; method = oss
+; source = /dev/dsp
+
+; method = jack
+; source = default
+
+# The options 'sample_rate', 'sample_bits', 'channels' and 'autoconnect' can be configured for some input methods:
+#   sample_rate: fifo, pipewire, sndio, oss
+#   sample_bits: fifo, pipewire, sndio, oss
+#   channels:    sndio, oss, jack
+#   autoconnect: jack
+# Other methods ignore these settings.
+#
+# For 'sndio' and 'oss' they are only preferred values, i.e. if the values are not supported
+# by the chosen audio device, the device will use other supported values instead.
+# Example: 48000, 32 and 2, but the device only supports 44100, 16 and 1, then it
+# will use 44100, 16 and 1.
+#
+; sample_rate = 44100
+; sample_bits = 16
+; channels = 2
+; autoconnect = 2
+
+
+[output]
+
+# Output method. Can be 'ncurses', 'noncurses', 'raw', 'noritake', 'sdl'
+# or 'sdl_glsl'.
+# 'noncurses' (default) uses a buffer and cursor movements to only print
+# changes from frame to frame in the terminal. Uses less resources and is less
+# prone to tearing (vsync issues) than 'ncurses'.
+#
+# 'raw' is an 8 or 16 bit (configurable via the 'bit_format' option) data
+# stream of the bar heights that can be used to send to other applications.
+# 'raw' defaults to 200 bars, which can be adjusted in the 'bars' option above.
+#
+# 'noritake' outputs a bitmap in the format expected by a Noritake VFD display
+#  in graphic mode. It only support the 3000 series graphical VFDs for now.
+#
+# 'sdl' uses the Simple DirectMedia Layer to render in a graphical context.
+# 'sdl_glsl' uses SDL to create an OpenGL context. Write your own shaders or
+# use one of the predefined ones.
+; method = noncurses
+
+# Orientation of the visualization. Can be 'bottom', 'top', 'left' or 'right'.
+# Default is 'bottom'. Other orientations are only supported on sdl and ncruses
+# output. Note: many fonts have weird glyphs for 'top' and 'right' characters,
+# which can make ncurses not look right.
+; orientation = bottom
+
+# Visual channels. Can be 'stereo' or 'mono'.
+# 'stereo' mirrors both channels with low frequencies in center.
+# 'mono' outputs left to right lowest to highest frequencies.
+# 'mono_option' set mono to either take input from 'left', 'right' or 'average'.
+# set 'reverse' to 1 to display frequencies the other way around.
+; channels = stereo
+; mono_option = average
+; reverse = 0
+
+# Raw output target. A fifo will be created if target does not exist.
+; raw_target = /dev/stdout
+
+# Raw data format. Can be 'binary' or 'ascii'.
+; data_format = binary
+
+# Binary bit format, can be '8bit' (0-255) or '16bit' (0-65530).
+; bit_format = 16bit
+
+# Ascii max value. In 'ascii' mode range will run from 0 to value specified here
+; ascii_max_range = 1000
+
+# Ascii delimiters. In ascii format each bar and frame is separated by a delimiters.
+# Use decimal value in ascii table (i.e. 59 = ';' and 10 = '\n' (line feed)).
+; bar_delimiter = 59
+; frame_delimiter = 10
+
+# sdl window size and position. -1,-1 is centered.
+; sdl_width = 1000
+; sdl_height = 500
+; sdl_x = -1
+; sdl_y= -1
+; sdl_full_screen = 0
+
+# set label on bars on the x-axis. Can be 'frequency' or 'none'. Default: 'none'
+# 'frequency' displays the lower cut off frequency of the bar above.
+# Only supported on ncurses and noncurses output.
+; xaxis = none
+
+# enable alacritty synchronized updates. 1 = on, 0 = off
+# removes flickering in alacritty terminal emulator.
+# defaults to off since the behaviour in other terminal emulators is unknown
+; alacritty_sync = 0
+
+# Shaders for sdl_glsl, located in $HOME/.config/cava/shaders
+; vertex_shader = pass_through.vert
+; fragment_shader = bar_spectrum.frag
+
+; for glsl output mode, keep rendering even if no audio
+; continuous_rendering = 0
+
+# disable console blank (screen saver) in tty
+# (Not supported on FreeBSD)
+; disable_blanking = 0
+
+# show a flat bar at the bottom of the screen when idle, 1 = on, 0 = off
+; show_idle_bar_heads = 1
+
+# show waveform instead of frequency spectrum, 1 = on, 0 = off
+; waveform = 0
+
+[color]
+
+# Colors can be one of seven predefined: black, blue, cyan, green, magenta, red, white, yellow.
+# Or defined by hex code '#xxxxxx' (hex code must be within ''). User defined colors requires
+# a terminal that can change color definitions such as Gnome-terminal or rxvt.
+# default is to keep current terminal color
+; background = default
+; foreground = default
+
+# SDL and sdl_glsl only support hex code colors, these are the default:
+; background = '#111111'
+; foreground = '#33ffff'
+
+
+# Gradient mode, only hex defined colors are supported,
+# background must also be defined in hex or remain commented out. 1 = on, 0 = off.
+# You can define as many as 8 different colors. They range from bottom to top of screen
+; gradient = 0
+; gradient_count = 8
+; gradient_color_1 = '#59cc33'
+; gradient_color_2 = '#80cc33'
+; gradient_color_3 = '#a6cc33'
+; gradient_color_4 = '#cccc33'
+; gradient_color_5 = '#cca633'
+; gradient_color_6 = '#cc8033'
+; gradient_color_7 = '#cc5933'
+; gradient_color_8 = '#cc3333'
+
+
+
+[smoothing]
+
+# Percentage value for integral smoothing. Takes values from 0 - 100.
+# Higher values means smoother, but less precise. 0 to disable.
+# DEPRECATED as of 0.8.0, use noise_reduction instead
+; integral = 77
+
+# Disables or enables the so-called "Monstercat smoothing" with or without "waves". Set to 0 to disable.
+; monstercat = 0
+; waves = 0
+
+# Set gravity percentage for "drop off". Higher values means bars will drop faster.
+# Accepts only non-negative values. 50 means half gravity, 200 means double. Set to 0 to disable "drop off".
+# DEPRECATED as of 0.8.0, use noise_reduction instead
+; gravity = 100
+
+
+# In bar height, bars that would have been lower that this will not be drawn.
+# DEPRECATED as of 0.8.0
+; ignore = 0
+
+# Noise reduction, int 0 - 100. default 77
+# the raw visualization is very noisy, this factor adjusts the integral and gravity filters to keep the signal smooth
+# 100 will be very slow and smooth, 0 will be fast but noisy.
+; noise_reduction = 77
+
+
+[eq]
+
+# This one is tricky. You can have as much keys as you want.
+# Remember to uncomment more than one key! More keys = more precision.
+# Look at readme.md on github for further explanations and examples.
+; 1 = 1 # bass
+; 2 = 1
+; 3 = 1 # midtone
+; 4 = 1
+; 5 = 1 # treble

cava/shaders/bar_spectrum.frag

@@ -0,0 +1,79 @@
+#version 330
+
+in vec2 fragCoord;
+out vec4 fragColor;
+
+// bar values. defaults to left channels first (low to high), then right (high to low).
+uniform float bars[512];
+
+uniform int bars_count;    // number of bars (left + right) (configurable)
+uniform int bar_width;    // bar width (configurable), not used here
+uniform int bar_spacing;    // space bewteen bars (configurable)
+
+uniform vec3 u_resolution; // window resolution
+
+//colors, configurable in cava config file (r,g,b) (0.0 - 1.0)
+uniform vec3 bg_color; // background color
+uniform vec3 fg_color; // foreground color
+
+uniform int gradient_count;
+uniform vec3 gradient_colors[8]; // gradient colors
+
+vec3 normalize_C(float y,vec3 col_1, vec3 col_2, float y_min, float y_max)
+{
+    //create color based on fraction of this color and next color
+    float yr = (y - y_min) / (y_max - y_min);
+    return col_1 * (1.0 - yr) + col_2 * yr;
+}
+
+void main()
+{
+    // find which bar to use based on where we are on the x axis
+    float x = u_resolution.x * fragCoord.x;
+    int bar = int(bars_count * fragCoord.x);
+
+    //calculate a bar size
+    float bar_size = u_resolution.x / bars_count;
+
+    //the y coordinate and bar values are the same
+    float y =  bars[bar];
+
+    // make sure there is a thin line at bottom
+    if (y * u_resolution.y < 1.0)
+    {
+      y = 1.0 / u_resolution.y;
+    }
+
+    //draw the bar up to current height
+    if (y > fragCoord.y)
+    {
+        //make some space between bars basen on settings
+        if (x > (bar + 1) * (bar_size) - bar_spacing)
+        {
+            fragColor = vec4(bg_color,1.0);
+        }
+        else
+        {
+            if (gradient_count == 0)
+            {
+                fragColor = vec4(fg_color,1.0);
+            }
+            else
+            {
+                //find which color in the configured gradient we are at
+                int color = int((gradient_count - 1) * fragCoord.y);
+
+                //find where on y this and next color is supposed to be
+                float y_min = color / (gradient_count - 1.0);
+                float y_max = (color + 1.0) / (gradient_count - 1.0);
+
+                //make color
+                fragColor = vec4(normalize_C(fragCoord.y, gradient_colors[color], gradient_colors[color + 1], y_min, y_max), 1.0);
+            }
+        }
+    }
+    else
+    {
+        fragColor = vec4(bg_color,1.0);
+    }
+}

cava/shaders/northern_lights.frag

@@ -0,0 +1,34 @@
+#version 330
+
+in vec2 fragCoord;
+out vec4 fragColor;
+
+// bar values. defaults to left channels first (low to high), then right (high to low).
+uniform float bars[512];
+
+uniform int bars_count;    // number of bars (left + right) (configurable)
+
+uniform vec3 u_resolution; // window resolution, not used here
+
+//colors, configurable in cava config file
+uniform vec3 bg_color; // background color(r,g,b) (0.0 - 1.0), not used here
+uniform vec3 fg_color; // foreground color, not used here
+
+void main()
+{
+    // find which bar to use based on where we are on the x axis
+    int bar = int(bars_count * fragCoord.x);
+
+    float bar_y = 1.0 - abs((fragCoord.y - 0.5)) * 2.0;
+    float y = (bars[bar]) * bar_y;
+
+    float bar_x = (fragCoord.x - float(bar) / float(bars_count)) * bars_count;
+    float bar_r = 1.0 - abs((bar_x - 0.5)) * 2;
+
+    bar_r = bar_r * bar_r * 2;
+
+    // set color
+    fragColor.r = fg_color.x * y * bar_r;
+    fragColor.g = fg_color.y * y * bar_r;
+    fragColor.b = fg_color.z * y * bar_r;
+}

cava/shaders/pass_through.vert

@@ -0,0 +1,14 @@
+#version 330
+
+
+// Input vertex data, different for all executions of this shader.
+layout(location = 0) in vec3 vertexPosition_modelspace;
+
+// Output data ; will be interpolated for each fragment.
+out vec2 fragCoord;
+
+void main()
+{
+    gl_Position =  vec4(vertexPosition_modelspace,1);
+    fragCoord  = (vertexPosition_modelspace.xy+vec2(1,1))/2.0;
+}

fastfetch/config.jsonc

@@ -0,0 +1,54 @@
+//    ______           __  ______      __
+//   / ____/___ ______/ /_/ ____/___ _/ /_
+//  / /_  / __ `/ ___/ __/ /   / __ `/ __/
+// / __/ / /_/ (__  ) /_/ /___/ /_/ / /_
+///_/    \__,_/____/\__/\____/\__,_/\__/
+//  https://github.com/m3tozz/FastCat
+{
+    "$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json",
+    "logo": {
+        "type": "small"
+    },
+    "display": {
+        "constants": [
+            "██ "
+        ]
+    },
+    "modules": [
+        {
+            "key": "{$1}",
+            "keyColor": "38;5;210",
+            "type": "os"
+        },
+        {
+            "key": "{$1}",
+            "keyColor": "38;5;84",
+            "type": "kernel"
+        },
+        {
+            "key": "{$1}",
+            "keyColor": "38;5;147",
+            "type": "shell"
+        },
+        {
+            "key": "{$1}",
+            "keyColor": "38;5;200",
+            "type": "packages"
+        },
+        {
+            "key": "{$1}",
+            "keyColor": "38;5;44",
+            "type": "wm"
+        },
+        {
+            "key": "{$1}",
+            "keyColor": "38;5;75",
+            "type": "cpu"
+        },
+        {
+            "key": "{$1}",
+            "keyColor": "38;5;123",
+            "type": "memory"
+        }
+    ]
+}

fish/conf.d/rustup.fish

@@ -0,0 +1 @@
+source "$HOME/.cargo/env.fish"

fish/config.fish

@@ -0,0 +1,15 @@
+
+fish_add_path /home/arope/.spicetify
+set -x PLC enp3s0
+
+# Auto-start Hyprland on TTY1 login
+if status is-login
+    if test (tty) = "/dev/tty1"
+        exec Hyprland
+    end
+end
+
+# Force GTK apps to respect local CSS and OLED Dark
+set -gx ADW_DISABLE_PORTAL 1
+set -gx GTK_THEME Adwaita-dark
+

fish/fish_variables

@@ -0,0 +1,40 @@
+# This file contains fish universal variable definitions.
+# VERSION: 3.0
+SETUVAR __fish_initialized:3800
+SETUVAR fish_color_autosuggestion:brblack
+SETUVAR fish_color_cancel:\x2dr
+SETUVAR fish_color_command:normal
+SETUVAR fish_color_comment:red
+SETUVAR fish_color_cwd:green
+SETUVAR fish_color_cwd_root:red
+SETUVAR fish_color_end:green
+SETUVAR fish_color_error:brred
+SETUVAR fish_color_escape:brcyan
+SETUVAR fish_color_history_current:\x2d\x2dbold
+SETUVAR fish_color_host:normal
+SETUVAR fish_color_host_remote:yellow
+SETUVAR fish_color_normal:normal
+SETUVAR fish_color_operator:brcyan
+SETUVAR fish_color_param:cyan
+SETUVAR fish_color_quote:yellow
+SETUVAR fish_color_redirection:cyan\x1e\x2d\x2dbold
+SETUVAR fish_color_search_match:white\x1e\x2d\x2dbackground\x3dbrblack\x1e\x2d\x2dbold
+SETUVAR fish_color_selection:white\x1e\x2d\x2dbackground\x3dbrblack\x1e\x2d\x2dbold
+SETUVAR fish_color_status:red
+SETUVAR fish_color_user:brgreen
+SETUVAR fish_color_valid_path:\x2d\x2dunderline
+SETUVAR fish_key_bindings:fish_default_key_bindings
+SETUVAR fish_pager_color_background:\x1d
+SETUVAR fish_pager_color_completion:normal
+SETUVAR fish_pager_color_description:yellow\x1e\x2di
+SETUVAR fish_pager_color_prefix:normal\x1e\x2d\x2dbold\x1e\x2d\x2dunderline
+SETUVAR fish_pager_color_progress:brwhite\x1e\x2d\x2dbackground\x3dcyan\x1e\x2d\x2dbold
+SETUVAR fish_pager_color_secondary_background:\x1d
+SETUVAR fish_pager_color_secondary_completion:\x1d
+SETUVAR fish_pager_color_secondary_description:\x1d
+SETUVAR fish_pager_color_secondary_prefix:\x1d
+SETUVAR fish_pager_color_selected_background:\x2dr
+SETUVAR fish_pager_color_selected_completion:\x1d
+SETUVAR fish_pager_color_selected_description:\x1d
+SETUVAR fish_pager_color_selected_prefix:\x1d
+SETUVAR fish_user_paths:/home/arope/\x2espicetify\x1e/home/arope/\x2elocal/bin\x1e/home/arope/\x2ecargo/bin

fish/functions/musicfetch.fish

@@ -0,0 +1,26 @@
+function musicfetch
+    # Clear the terminal for that fresh widget look
+    clear
+
+    # Get metadata using playerctl
+    set -l title (playerctl metadata title)
+    set -l artist (playerctl metadata artist)
+    set -l album (playerctl metadata album)
+    set -l art_url (playerctl metadata mpris:artUrl)
+
+    # Download the cover art to a temp file if it exists
+    if test -n "$art_url"
+        curl -s "$art_url" -o /tmp/cover.png
+        # Display the image using chafa (tuned for a small widget size)
+        chafa --size=20x10 /tmp/cover.png
+    else
+        echo "No Art Found"
+    end
+
+    # Print the info in a style matching your fastfetch setup
+    # Adwaita Blue (#3584e4) and Adwaita Green (#33d17a)
+    echo -e "\e[34mTitle  \e[0m: $title"
+    echo -e "\e[34mArtist \e[0m: $artist"
+    echo -e "\e[32mAlbum  \e[0m: $album"
+    echo -e "\e[35mStatus \e[0m: "(playerctl status)
+end

nwg-look/config

@@ -0,0 +1,7 @@
+{
+ "export-settings-ini": true,
+ "export-gtkrc-20": true,
+ "export-index-theme": true,
+ "export-xsettingsd": true,
+ "export-gtk4-symlinks": true
+}

rofi/config-clip.rasi

@@ -0,0 +1,80 @@
+configuration {
+    modi: "dmenu";
+    show-icons: true;
+    font: "Inter Bold 11";
+    display-dmenu: "> ";
+}
+
+* {
+    /* Hardcoded high-contrast palette */
+    bg: #000000;
+    fg: #ffffff;
+    border-col: #ffffff44;
+    sel-bg: #ffffff;
+    sel-fg: #000000;
+    
+    background-color: transparent;
+    text-color: @fg;
+}
+
+window {
+    width: 25%;
+    background-color: @bg;
+    border: 1px;
+    border-color: @border-col;
+    border-radius: 0px;
+    padding: 25px;
+}
+
+mainbox {
+    children: [ inputbar, listview ];
+    spacing: 10px;
+}
+
+inputbar {
+    children: [ prompt, entry ];
+    padding: 0 0 10px 0;
+}
+
+prompt {
+    text-color: @fg;
+}
+
+entry {
+    text-color: @fg;
+}
+
+listview {
+    lines: 10;
+    columns: 1;
+    fixed-height: true;
+    scrollbar: false;
+    spacing: 5px;
+}
+
+element {
+    padding: 8px;
+    border-radius: 0px;
+    /* This kills the cream/grey background boxes from your screenshot */
+    background-color: transparent;
+}
+
+element selected {
+    /* The high-contrast "Fuzzel" selection look */
+    background-color: @sel-bg;
+    text-color: @sel-fg;
+}
+
+element-text selected {
+    text-color: @sel-fg;
+}
+
+element-icon {
+    size: 48px;
+    padding: 0 15px 0 0;
+}
+
+element-text {
+    vertical-align: 0.5;
+    text-color: inherit;
+}

spicetify/CustomApps/marketplace/README.md

@@ -0,0 +1,35 @@
+# Spicetify Marketplace
+
+<p>
+  <a href="https://github.com/spicetify/marketplace/releases/latest">
+    <img src="https://img.shields.io/github/v/release/spicetify/marketplace?include_prereleases">
+  </a>
+  <a href="https://github.com/spicetify/marketplace/releases">
+    <img src="https://img.shields.io/github/downloads/spicetify/marketplace/total.svg">
+  </a>
+  <a href="https://github.com/spicetify/marketplace/issues?q=is%3Aissue+is%3Aclosed">
+    <img src="https://img.shields.io/github/issues-closed/spicetify/marketplace">
+  </a>
+  <a href="https://github.com/spicetify/marketplace/commits/main">
+    <img src="https://img.shields.io/github/commit-activity/m/spicetify/marketplace">
+  </a>
+</p>
+
+Customize your Spotify client directly from within [Spicetify](https://github.com/spicetify/cli)!
+
+Marketplace allows you to **browse, download, and install** extensions, themes, and CSS snippets with ease. You can also browse custom apps, but will need to do some manual installation to get them working.
+
+Made with [Spicetify Creator](https://github.com/spicetify/spicetify-creator)
+
+Head to the [wiki](https://github.com/spicetify/marketplace/wiki) to get started!
+
+---
+
+## Links
+- [Overview](https://github.com/spicetify/marketplace/wiki)
+- [Installation](https://github.com/spicetify/marketplace/wiki/Installation)
+- [Publishing to Marketplace](https://github.com/spicetify/marketplace/wiki/Publishing-to-Marketplace)
+- [Contributions](https://github.com/spicetify/marketplace/wiki/Contributions)
+- [Development](https://github.com/spicetify/marketplace/wiki/Development)
+- [Translating/Localizing Marketplace](https://github.com/spicetify/marketplace/wiki/Localizing-Marketplace)
+

spicetify/CustomApps/marketplace/manifest.json

@@ -0,0 +1,12 @@
+{
+  "name": {
+    "en": "Marketplace",
+    "ru": "Маркетплейс"
+  },
+  "icon": "<svg xmlns=\"http://www.w3.org/2000/svg\" width=\"100%\" height=\"100%\" viewBox=\"0 0 76.465 68.262\"><path d=\"M151.909 72.923v6.5h10.097l8.663 44.567h48.968v-6.5h-43.61l-1.2-6.172h42.974l10.35-33.91h-59.915l-.872-4.485H151.91zm17.59 10.984h49.867l-6.393 20.91h-39.409l-4.064-20.91zm5.626 44.11a6.5 6.5 0 0 0-6.5 6.5 6.5 6.5 0 0 0 6.5 6.501 6.5 6.5 0 0 0 6.5-6.5 6.5 6.5 0 0 0-6.5-6.5zm38.274 0a6.5 6.5 0 0 0-6.5 6.5 6.5 6.5 0 0 0 6.5 6.501 6.5 6.5 0 0 0 6.5-6.5 6.5 6.5 0 0 0-6.5-6.5z\" style=\"fill:currentColor;stroke-width:.264583\" transform=\"translate(-151.909 -72.923)\"/></svg>\n",
+  "active-icon": "<svg xmlns=\"http://www.w3.org/2000/svg\" width=\"100%\" height=\"100%\" viewBox=\"0 0 76.465 68.262\"><path d=\"M151.909 72.923v6.5h10.097l8.663 44.567h48.968v-6.5h-43.61l-1.2-6.172h42.974l10.35-33.91h-59.915l-.872-4.485H151.91zm23.216 55.095a6.5 6.5 0 0 0-6.5 6.5 6.5 6.5 0 0 0 6.5 6.5 6.5 6.5 0 0 0 6.5-6.5 6.5 6.5 0 0 0-6.5-6.5zm38.274 0a6.5 6.5 0 0 0-6.5 6.5 6.5 6.5 0 0 0 6.5 6.5 6.5 6.5 0 0 0 6.5-6.5 6.5 6.5 0 0 0-6.5-6.5z\" style=\"fill:currentColor;stroke-width:.264583\" transform=\"translate(-151.909 -72.923)\"/></svg>\n",
+  "subfiles": [],
+  "subfiles_extension": [
+    "extension.js"
+  ]
+}

spicetify/Themes/marketplace/color.ini

@@ -0,0 +1,2 @@
+[Marketplace]
+

spicetify/config-xpui.ini

@@ -0,0 +1,32 @@
+[Setting]
+inject_css             = 1
+replace_colors         = 1
+check_spicetify_update = 1
+always_enable_devtools = 0
+current_theme          = marketplace
+overwrite_assets       = 0
+spotify_launch_flags   = 
+spotify_path           = /usr/lib64/spotify-client
+prefs_path             = /home/arope/.config/spotify/prefs
+color_scheme           = 
+inject_theme_js        = 1
+
+[Preprocesses]
+disable_ui_logging = 1
+remove_rtl_rule    = 1
+expose_apis        = 1
+disable_sentry     = 1
+
+[AdditionalOptions]
+extensions            = 
+custom_apps           = marketplace
+sidebar_config        = 0
+home_config           = 1
+experimental_features = 1
+
+[Patch]
+
+; DO NOT CHANGE!
+[Backup]
+version = 1.2.86.502.g8cd7fb22
+with    = 2.43.2